Story of Clint Brunner’s 1968 Dodge HEMI LO23 Dart

Dr. Clint Brunner is a proud owner of some great Mopar muscle cars, but nothing is as fascinating as a real deal LO23 Super Stock HEMI powered 1968 Dodge Dart. Check out the video we put together for his awesome lightweight drag car, and read more about the glorious A-body below.


hot american cars youtube channel


As you saw in the video the 1968 Dodge HEMI Dart lived its entire life 1/4 mile at a time as the 80 Hurst LO23 Super Stock cars weren’t street legal, and this bad boy was drag raced since Day 1. The Mopar only had two owners prior Clint Brunner who acquired it in February of 2017, and it’s very well preserved. I know some of you would like to know why he replaced the correct 426 Super Stock HEMI engine. Here is what Dr. Brunner shared with me:

real 1968 dodge hemi dart lo23

“I’ve always been fascinated by the legacy and mystique of the meanest drag car ever produced- the 1968 LO23 Hurst HEMI Dodge Dart. I like the thrill of taking an authentic factory drag car down our local drag strip, knowing I am re-living a piece of history as well as to run it along with my 2018 Dodge Demon, as the two fastest factory drag cars of their day, 50 years apart!” 

dodge factory race cars

“The 1968 Dodge Dart LO23 came with the correct, class-legal Super Stock 426 HEMI powerplant, which made about 650 horsepower. I pulled that out and put it on an engine “run stand” so I can fire it up from time to time. My goal was a drag car that could easily run flat 9 seconds or better, with an engine that makes big power numbers with no fuss, and is not hard to maintain.” 

1968 dodge dart lo23 engine

“Tim Banning of “For Hemis Only” built for me a custom-spec Keith Black 604 all-aluminum HEMI block with Cross Ram intake and twin original spec 770 Holley carbs. It made 950hp on a conservative dyno at 6,500rpm, and the numbers were still climbing. As a Stroker motor, it is built more for lower and mid range power, compared to the 426 that run in SSAH class. Those engines are very finicky and require frequent tear downs, and I don’t have time for that.”

1968 dodge dart cross ram hemi engine

The only other mods to the Hurst LO23 Dart are the suspension upgrades done in the early 1970’s, retaining the original leaf spring/ladder bar arrangement, but with tubbed and narrowed read end, Santhuff drag shocks, and of course wheelie bars. The car still has the correct thin window glass and all of the original body panels. The suspension was setup by the people who built the Motown Missile Challenger.

hurst super stock dodge dart drag car

Rod Waltjer, Greg Sheepstra and Wade Lardy of MuscleCar Creations along with Joe Foster of Kustom Joe’s helped a lot with the build. Clint is happy with the current performance of 1968 Dodge HEMI Dart, considering the engine is still being broken in. The plan for 2021 is to turn the dial all the way up to 10 with the trans brake, rev limiter and shift points, and dip into the 8’s as well as to paint the LO23 Dart in the first race livery that Dick Smith used; White with Red stripes.

Follow Clint Brunner on Social Media to see more of his Mopars
YouTube: DakotaGT and Instagram: @dakota_gt


Did You See the Story of Ray Colclough’s 1968 Dodge Dart Drag Car?


dodge dart drag car build
Click on the Photo to See the Story of Ray’s 1968 Dodge Dart Drag Car
1963 chevy tootsie nova drag racing

1963 Chevy “Tootsie” Nova 427 SBC Race Car | The Story

We don't know much of the history behind the 1963 Chevy "Tootsie" Nova, but there is plenty of action in the video we put...
1965 ford mustang gt350 r tribute

Paul Ryder’s 1965 Ford Mustang Shelby GT350 R Tribute

Saving a 1965 Ford Mustang from the woods, Paul Ryder has built a great GT350 R tribute car, which I am sure even Carroll...
go mango 1970 dodge coronet super bee

Dave Mac’s Go Mango 1970 Dodge Coronet Super Bee

I really love the "Bumble Bee Wings" as they make the 1970 Dodge Coronet stand out from the other B-body Mopars produced in that...
numbers matching plymouth superbird

Mark Coffey’s Highly Original Plymouth Superbird Story

While the 1970 Plymouth Superbird is one of the most iconic American muscle cars, this Mopar currently lives in New Zealand. However, its owner...
plymouth 572 hemi road runner build

George Nilsen’s 572 HEMI Plymouth Road Runner Story

Like Jim Biron wrote in his article back in 2010, this 1968 Plymouth Road Runner roars loud enough to, not only scare the Coyote,...
steve clukey 1970 plymouth duster

Story of Steve Clukey’s 1970 Plymouth Duster

Owning a 1970 Plymouth Duster since brand new, never stopped modifying it and drag racing all over the East coast for so many years....
restomodded 1969 ford mustang 347 stroker

Ed Curlee’s Immaculate ’69 Ford Mustang 347 Build

You don't get to see many 347 powered '69 Mustangs, but Ed's Sportsroof is not your average custom build and it does not pack...
1971 plymouth cuda 340 build

Story of Al Young’s 1971 Plymouth Cuda 340 Build

Al Young's 1971 Plymouth Cuda 340 has a very interesting story. It was his first car, which he acquired at the age of 17,...
565 big block 1971 chevy camaro

Jay Breitmaier’s 1971 Chevy Camaro Pro Street

Not long ago we featured a quick video of Jay Breitmaier's Pro Street 1971 Chevy Camaro from a car show in Chattanooga, Tennessee. I...
restored 1967 ford mustang gt 390

Story of Bill Kramer’s 1967 Mustang Fastback GT390 Build

Restorer of several classic Mustangs, when Bill Kramer came across a newspaper ad for two ponies sitting in a barn in Wisconsin he knew...
1967 dodge dart pro street

Story Of Jason Owens 1967 Dodge Dart Pro Street

 One Awesome 1967 Dodge Dart Build! Those of you who follow our Mopar Muscle Facebook page will definitely remember this Pro Street 1967 Dodge Dart...